What’s the Best Type of Hot Tub Filter? – Hot Tub Filter Buyer’s Guide

Hot tub filters are incredibly important for your hot tub’s health. These filters come in 3 styles that are highly comparable; sand filters, cartridge filters, and D.E. filters. Each of these offers distinct advantages and disadvantages that the consumer (you) must recognize before you can make an informed decision. Below are the differentiating characteristics that match each type of filter:

Having a great hot tub filter is one of the most important parts about having a clean and balanced hot tub.

Find more articles on Hot Tubs here!

  • Sand: A low-priced filter with not much need for maintenance. The least effective at filtering. Also, very useful for larger hot tubs because it doesn’t often become clogged. However, it can slowly erode and become less effective as pressure builds in the filter and time passes. Lasts 5-7 years.
  • Cartridge: Medium-priced filter with a higher efficiency rating. Cleans better than sand filters. Just as easy to maintain as a sand filter but is more effective in practice. “Traditional filter”. Only lasts 3-5 years before needing to be replaced.
  • D.E.: The most expensive type of filter with the most maintenance. The hardest working and best for overall water cleanliness (filters smallest particles). A diatomaceous filter does not need to be replaced very often. The internal grid will need to be replaced every 2-3 years. Carries some health risks.

Introduction to Hot Tub Filters

When it comes to your hot tub’s health, nothing is more important than the filter you use. A hot tub filter’s job is to take dirty and contaminated water from the spa into its system. Once the water enters it is then cleaned, and then injected back out into the spa for further use. This is important because you need to make sure the water you swim in is clean and free of any debris or any other potentially harmful items.

When looking for hot tub filters, there are 3 distinct types of filters; cartridge filters, diatomaceous (D.E.) filters, and sand filters. In the next three sections I am going to detail how each of them works. This should provide clarity on what filter is the “best” for your needs.

Swimming pool and Hot Tub testing basics

Hot Tub Sand Filters

Being the cheapest option for consumers to purchase, sand filters do the job. Actually, they do exceptionally well given their reasonable price point. This cost is also paired with a low need for maintenance from the user. Gravity does a lot of the job for you, pulling the water from skimmers through the sand and filtering the water in a streamlined manner. This process almost entirely operates itself. These filters typically last 5-7 years depending on how much work is required to be done.

Sand filters do require to be on top of your water chemistry game. Since they are the least efficient of the filters, sand filters only can capture and clean larger particles (20 microns or larger). This means that keeping your hot tub well balanced with chemicals is key to killing the smaller particles that may be lurking in your water. Your sand filter can handle the large debris, but you will be required to put in extra work to reach the cleanliness levels of the two other types of filters.

Hot Tub Cartridge Filters

Cartridge filters are a step up from sand filters both in terms of expense and efficiency They represent a middle ground for consumers. This filter is not too expensive, nor too weak in terms of filter power. Cartridge filters do require more maintenance than a sand filter. Cartridge filters rely on a plastic cylinder that is surrounded by a polyester filter. The water flows in through one end of the cylinder, and particles of as small as 10 microns (half the size of the capabilities of a sand filter) are captured and stored in the tank. The newly cleaned water is then spewed through the “out” end of the cylinder and filtered back into the spa. Filters typically last for 3-5 years, depending on how much work is required to be done.

These cartridge filters require constant cleaning. This means that you need to be able to physically remove them and rinse them off in order for them to be the most effective. Also, occasionally these filters will need to be sprayed with filter cleaner. This chemical mix is necessary to keep your filter clean and running smoothly.

Hot Tub Diatomaceous (D.E.) Filters

Often considered the “top dog” in the filter industry, diatomaceous filters are the most expensive of the three options. They also clean water the deepest. This shows in the fact that D.E. filters can clean particles as small as 5 microns (two times smaller than cartridge filters, 4 times smaller than sand filters). You can rest assured that your water will be clean and safe for everyone using it. D.E. filters are so effective because they use an internal grid covered in white powder made from diatoms (remains of tiny aquatic organisms) that help clean and filter the water.

This powder is used as a sort of “pest control” in your water, and when used with the filter can almost completely eliminate all waste from the water, giving you peace of mind. D.E. filters also do not need to be fully replaced very often, but the grid inside of the filter will require a replacement every 2-3 years.

Downside to Diatomaceous Filters

D.E. filters do have some notable issues. Along with the high price mentioned previously, there will be a need for constant upkeep of the filter. Along with this, the use of these filters can be limited in your locale based on regulations based on the environmental and waste risks associated with this filter. The diatom powder can be hazardous, and this means that not only are there possible environmental damage associated with this filter. The powder can be dangerous when exposed directly long-term to humans, but is not considered dangerous to those swimming. This means that you must be careful when handling the powder and take precautions such as wearing chemical masks and gloves to prevent any possible accidents.

Try out our Pool Calculator as you clean and maintain your hot tub! For more information on how to care for your swimming pool or hot tub, see our blogs on Pool Maintenance

Share on facebook
Share on twitter
Share on linkedin
Share on print
Share on email

More to explore...

How to Clear Cloudy Swimming Pool Water

There are few things that can stop a pool party altogether—one of these things is cloudy swimming pool water. Cloudy water can be potentially dangerous, so never swim if your water looks less than clear. Testing your pool chemistry can determine whether this issue is caused by a chemical imbalance…

Read More »

Swimming Pool Water Testing Basics

Everyone enjoys having a clean and clear pool, but maintaining perfectly balanced pool chemistry can be a challenge. It is necessary to learn what each pool test means and why it is important in keeping your pool in perfect shape. We will cover four components of pool chemistry: free chlorine, pH, total alkalinity and cyanuric acid.

Read More »

Saltwater vs. Chlorine Swimming Pool Sanitation Pros and Cons

Your pool is the perfect place for family fun in the sun—if it’s kept safe and clean. It’s important to pick a method of sanitation for your pool that works for your lifestyle. There are two major types of pool sanitation: saltwater and chlorine. This article describes the benefits and challenges with both.

Read More »
Close Menu